MC100EP140DR2G
| Parameters | |
|---|---|
| Output | ECL |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Frequency (Max) | 2GHz |
| Halogen Free | Halogen Free |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Input | NECL, PECL |
| Ratio - Input:Output | 1:2 |
| PLL | No |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | No/No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Phase Frequency Detector |
| Terminal Finish | Tin (Sn) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC100EP140 |
MC100EP140DR2G Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 8 terminations found in the file. This electronic frequency generator requires a voltage of 3.3V. This Clock PLL will be fed by NECL, PECL as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. A clock-based RF synthesizer that provides a max frequency of 2GHz is available. Surface Mount-slots make it easy to mount this electronic component on panels. This clock generator would require a maximum supply voltage of 3.6V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. There are 3V~3.6V available for use with this clock PLL. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. There are several logic levels in ECL logic that can be used with this clock generator. It has been classified as a Phase Frequency Detector electronic part, which means that it is a semiconductor. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. According to the base part number, its related parts can be founded. There are a number of 8 pins that are available on the clock generators. In terms of the supply voltage, PLL clock can handle 3.3V volts. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. It is part of the 100EP series of electronic components.
MC100EP140DR2G Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
MC100EP140DR2G Applications
There are a lot of ON Semiconductor MC100EP140DR2G Clock Generators applications.
- Televisions
- Clock generation systems
- Walkie-talkies
- Phase modulation cellular systems
- Pulsed digital systems
- High-frequency induction heating
- Clock recovery
- FPGA and processor clocks
- Various decoding circuits
- Cellular/4G
