MC100EP29DT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 100EP |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | -3V~-5.5V |
| Reach Compliance Code | unknown |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 3GHz |
| Current - Quiescent (Iq) | 57mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| RoHS Status | ROHS3 Compliant |
MC100EP29DT Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. D flip flop is included in the Tubepackage. T flip flop uses Differentialas its output configuration. It is configured with the trigger Positive, Negative. There is an electronic component mounted in the way of Surface Mount. A voltage of -3V~-5.5Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. The type of this D latch is D-Type. It belongs to the 100EPseries of FPGAs. Its output frequency should not exceed 3GHz. A total of 2elements are contained within it. There is 57mA quiescent consumption.
MC100EP29DT Features
Tube package
100EP series
MC100EP29DT Applications
There are a lot of Rochester Electronics, LLC MC100EP29DT Flip Flops applications.
- Pattern generators
- EMI reduction circuitry
- Latch-up performance
- Asynchronous counter
- Bus hold
- ESD performance
- Divide a clock signal by 2 or 4
- CMOS Process
- Cold spare funcion
- Buffer registers
