MC100EP29DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 100EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP29 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Output Current | 50mA |
| Clock Frequency | 3GHz |
| Propagation Delay | 575 ps |
| Turn On Delay Time | 420 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 57mA |
| Max Input Voltage | 2.42V |
| Halogen Free | Halogen Free |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 60mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.05mm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP29DTG Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). Package Tubeembeds it. Currently, the output is configured to use Differential. This trigger is configured to use Positive, Negative. Surface Mountis occupied by this electronic component. A supply voltage of -3V~-5.5V is required for operation. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 100EP series. This D flip flop should not have a frequency greater than 3GHz. It consumes 57mA of quiescent current without being affected by external factors. There are 20 terminations,D latch belongs to the 100EP29 family. A voltage of 3.3V is used as the power supply for this D latch. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. There is a 5.5Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 3V for normal operation. Despite its superior flexibility, it relies on 2 circuits to achieve it. On the basis of its reliable performance, this D flip flop is well suited for use with RAIL. There are -4.5V power supplies attached to it. Featuring the maximum design flexibility, it has an output current of 50mA . Additionally, you may refer to the additional NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V of the electronic flip flop. A -50mAvalue is set for the high level output current. 50mAis set as the low level output current.
MC100EP29DTG Features
Tube package
100EP series
20 pins
-4.5V power supplies
MC100EP29DTG Applications
There are a lot of ON Semiconductor MC100EP29DTG Flip Flops applications.
- Buffer registers
- Divide a clock signal by 2 or 4
- Balanced 24 mA output drivers
- Single Down Count-Control Line
- Data transfer
- CMOS Process
- Counters
- Computing
- Modulo – n – counter
- ESD performance
