banner_page

MC100EP32DTG

3.3V ECL DUAL Counters & Dividers 100EP Series 100EP32 8 Pins Positive, Negative 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC100EP32DTG
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 539
  • Description: 3.3V ECL DUAL Counters & Dividers 100EP Series 100EP32 8 Pins Positive, Negative 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin (Sn)
Additional Feature NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Subcategory Prescaler/Multivibrators
Technology ECL
Voltage - Supply 3V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 4GHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 100EP32
Pin Count 8
Supply Voltage-Max (Vsup) 5.5V
Power Supplies -4.5V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Nominal Supply Current 30mA
Propagation Delay 480 ps
Turn On Delay Time 480 ps
Reset Asynchronous
Max Input Voltage 2.42V
Halogen Free Halogen Free
Logic Type Divide-by-2
Output Polarity COMPLEMENTARY
Trigger Type Positive, Negative
Power Supply Current-Max (ICC) 40mA
Number of Data/Clock Inputs 1
Height 950μm
Length 3.1mm
Width 3.1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Weight 157.991892mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 2000
Series 100EP
JESD-609 Code e3
Pbfree Code yes

MC100EP32DTG Overview


This device is supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. The configuration of this device is based on 8terminations. The supply voltage of 3.3V permits it to operate with full flexibility. There are a total of 8 pins in all components. As [0], it is packaged. As part of the circuit, there are 8pins used to connect other components. Surface Mountis the way in which it is mounted. As a member of 100EP series, it is well suited for various applications. It is adopted that the logic type is [0]. In this case, the operating temperature should be set to -40°C~85°C. Using a Surface Mountmounting type, it is mounted. When the supply voltage is set to [0], it is able to operate with greater reliability. Pbfree code may result in yes. This electronic device is equipped with the following features [0]. Under its base part number of [0], you will find additional related parts. The voltage source produces -4.5Vvoltage. The minimum supply voltage (Vsup) is 3V. It operates with the frequency of 4GHz. It is possible to supply voltages up to 5.5V volts (Vsup). This electronic component is from the Prescaler/Multivibrators family. A normal operation of this device is ensured by its use of 1circuits. Inputs for data and clock are set to [0].

MC100EP32DTG Features


Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Frequency of 4GHz

MC100EP32DTG Applications


There are a lot of ON Semiconductor MC100EP32DTG Counters & Dividers applications.

  • MULTIPLICATION
  • Divide-by-N counting
  • Signal gating
  • POWER COMPUTATION
  • Timers
  • SQUARE ROOT
  • Binary counter/decoder
  • Divide-by"N" counters/frequency synthesizers
  • Dual Up Counters
  • TRUE RMS-TO-DC CONVERSION

Write a review

Note: HTML is not translated!
    Bad           Good