banner_page

MC100EP32DTR2

1 Element 3.3V ECL DUAL Counters & Dividers 100EP Series 100EP32 8 Pins Positive, Negative 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC100EP32DTR2
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 224
  • Description: 1 Element 3.3V ECL DUAL Counters & Dividers 100EP Series 100EP32 8 Pins Positive, Negative 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2006
Series 100EP
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
Additional Feature NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Subcategory Prescaler/Multivibrators
Technology ECL
Voltage - Supply 3V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 100EP32
Pin Count 8
Operating Supply Voltage 5.5V
Number of Elements 1
Power Supplies -4.5V
Supply Voltage-Min (Vsup) 3V
Reset Asynchronous
Logic Type Divide-by-2
Output Polarity COMPLEMENTARY
Trigger Type Positive, Negative
Propagation Delay (tpd) 0.45 ns
Power Supply Current-Max (ICC) 40mA
Max Frequency@Nom-Sup 4000000000Hz
Count Rate 4GHz
Number of Data/Clock Inputs 1
Length 3mm
Width 3mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MC100EP32DTR2 Overview


In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)package, it is supplied. This configuration uses 8terminations. 3.3Vis enabled to operate in an extremely flexible manner due to its supply voltage. The device contains 1terminations. In total, there are 8pins on the component. Tape & Reel (TR)is the packaging method used for this package. There are 8 pins going on to connect other parts in the circuit. The Surface Mountway is used to mount it. Due to its membership in the 100EPseries, it is suitable for a variety of applications. It is adopted that the logic type is [0]. The operating temperature should be set at -40°C~85°C. Having a mounting type of [0], it is suitable for installation. In the case of a supply voltage of [0], it operates more reliably. Among the features of this electronic device, NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vare essential. You can find more related parts under its base part number of 100EP32. There is -4.5V voltage comes from the voltage source. In order to operate, it requires a voltage of [0]. The minimum supply voltage (Vsup) is as low as 3V. It is part of the Prescaler/Multivibratorsfamily of electronic components. The device is configured with a clock and data input of 1.

MC100EP32DTR2 Features


Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Operating supply voltage of 5.5V

MC100EP32DTR2 Applications


There are a lot of ON Semiconductor MC100EP32DTR2 Counters & Dividers applications.

  • Counter control/timers
  • Programmable decade counters
  • Fixed or Programmable Frequency Division
  • Frequency division
  • SQUARING
  • TRUE RMS-TO-DC CONVERSION
  • ANALOG SIGNAL PROCESSING
  • Analog multiplexing and demultiplexing
  • LINEARIZATION
  • Frequency dividers

Write a review

Note: HTML is not translated!
    Bad           Good