MC100EP33DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 4GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP33 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Reset | Asynchronous |
| Number of Inputs | 2 |
| Max Input Voltage | 2.42V |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.44 ns |
| Power Supply Current-Max (ICC) | 37mA |
| Number of Data/Clock Inputs | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP33DG Overview
A 8-SOIC (0.154, 3.90mm Width)package is used for this device. It is configured with 8terminations. As a result of the supply voltage of 0, 3.3Vcan operate in a fully flexible manner. In wires, 1elements are connected. In total, there are 8pins on the component. It is packaged in the way of Tube. As part of the circuit, there are 8pins used to connect other components. The Surface Mountway is used to mount it. The 100EPseries is well suited to a number of uses. A logic type of Divide-by-4 is adopted. It is recommended to set the operating temperature to -40°C~85°C. It adopts a mounting type of Surface Mount. It is able to operate with higher reliability when the supply voltage of 3V~5.5V is provided. The result may be yeswhen expressing the result in Pbfree code. An important feature of this electronic device is [0]. Its base part number, [0], contains more related parts. As a result of the voltage source, there is -4.5V voltage. Supply voltage (Vsup) can be as low as 3V. 4GHzis the frequency of operation. The maximum supply voltage (Vsup) is up to 5.5V. This electronic component is from the Prescaler/Multivibrators family. The device has a configuration of 1 data/clock inputs. It is reported that the system has received 2outputs.
MC100EP33DG Features
Embedded in the 8-SOIC (0.154, 3.90mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Frequency of 4GHz
MC100EP33DG Applications
There are a lot of ON Semiconductor MC100EP33DG Counters & Dividers applications.
- Binary counter/decoder
- Divide-by-N counting
- VHF, UHF, FM, AM, etc.
- Up Counters
- Dual Up Counters
- Timers
- Signal gating
- LINEARIZATION
- Frequency division
- TRUE RMS-TO-DC CONVERSION
