MC100EP33DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: 0V VCC WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 4GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP33 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Reset | Asynchronous |
| Number of Inputs | 2 |
| Max Input Voltage | 2.42V |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.44 ns |
| Power Supply Current-Max (ICC) | 37mA |
| Input Current | 26mA |
| Number of Data/Clock Inputs | 1 |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP33DTG Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is a package in which this device is packaged. It is configured with 8terminations. This device is fully flexible due to the supply voltage of [0]. The 1elements are connected by wires. 8is the number of pins on all components. In this case, it is packaged as Tube. As part of the circuit, there are 8pins that connect other components. The device is mounted in the direction of [0]. The 100EPseries offers a wide range of applications due to its versatility. It is assumed that the logic type is [0]. Ideally, the operating temperature should be set to -40°C~85°C. A mounting type of Surface Mountis adopted. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Pbfree code may result in yes. It is important to note that NECL MODE: 0V VCC WITH VEE = -3V TO -5.5Vare really important features of this electronic device. Under its base part number of [0], you will find additional related parts. The voltage source generates -4.5Vvoltage. There is 3V minimum supply voltage (Vsup) for this device. With a frequency of [0], it operates. There is 5.5V maximum supply voltage (Vsup) allowed. It is part of the Prescaler/Multivibratorsfamily of electronic components. The device has a configuration of 1 data/clock inputs. 2 outputs is received by the system.
MC100EP33DTG Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: 0V VCC WITH VEE = -3V TO -5.5V
Frequency of 4GHz
MC100EP33DTG Applications
There are a lot of ON Semiconductor MC100EP33DTG Counters & Dividers applications.
- SQUARE ROOT
- Counter control/timers
- Decade counter/decimal decode display (CD4017B）
- Frequency dividing circuits
- Communications Digital Frequency Synthesizers;
- Divide-by-N counting
- Up Counters
- Frequency division
- Programmable decade counters
- TRUE RMS-TO-DC CONVERSION
