banner_page

MC100EP33DTR2G

1 Element 3.3V ECL DUAL Counters & Dividers 100EP Series 100EP33 8 Pins Positive, Negative 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC100EP33DTR2G
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 945
  • Description: 1 Element 3.3V ECL DUAL Counters & Dividers 100EP Series 100EP33 8 Pins Positive, Negative 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2000
Series 100EP
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin (Sn)
Additional Feature NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Subcategory Prescaler/Multivibrators
Technology ECL
Voltage - Supply 3V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 100EP33
Pin Count 8
Operating Supply Voltage 5.5V
Number of Elements 1
Power Supplies -4.5V
Supply Voltage-Min (Vsup) 3V
Reset Asynchronous
Halogen Free Halogen Free
Logic Type Divide-by-4
Output Polarity COMPLEMENTARY
Trigger Type Positive, Negative
Propagation Delay (tpd) 0.44 ns
Power Supply Current-Max (ICC) 37mA
Max Frequency@Nom-Sup 4000000000Hz
Count Rate 4GHz
Number of Data/Clock Inputs 1
Length 3mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MC100EP33DTR2G Overview


This is a device supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There are 8terminations used for configuring it. With a supply voltage of 3.3V volts, it is possible to run it in a fully flexible manner. In wires, 1elements are connected. The total number of component pins is 8. It is packaged in a manner consistent with Tape & Reel (TR). Circuit components are connected with 8pins. The device is mounted in the direction of [0]. This device is a member of the 100EPseries and is well suited for a wide range of applications. A logic type of Divide-by-4 is adopted. -40°C~85°Cshould be set as the operating temperature. It adopts a mounting type of Surface Mount. Providing a supply voltage of 3V~5.5Vallows it to operate more reliably. In terms of Pbfree code, the result may be yes. An important feature of this electronic device is [0]. You can find more related parts under its base part number of 100EP33. From the voltage source, there is a voltage of -4.5V volts. For the device to operate, a voltage supply of 5.5Vis required. It is possible to supply the device with the minimum supply voltage (Vsup) of 3V. This part is from the family [0]. The device is configured with a clock and data input of 1.

MC100EP33DTR2G Features


Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Operating supply voltage of 5.5V

MC100EP33DTR2G Applications


There are a lot of ON Semiconductor MC100EP33DTR2G Counters & Dividers applications.

  • Time-delay circuits
  • Frequency division
  • DIVISION
  • ALGEBRAIC COMPUTATION
  • Analog multiplexing and demultiplexing
  • Dual Up Counters
  • Time Out Timer for Consumer-Application Industrial Controls
  • Divide-by"N" counters/frequency synthesizers
  • LINEARIZATION
  • POWER COMPUTATION

Write a review

Note: HTML is not translated!
    Bad           Good