MC100EP33MNR4G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100EP |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP33 |
| Pin Count | 8 |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 1 |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Reset | Asynchronous |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.44 ns |
| Power Supply Current-Max (ICC) | 37mA |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Count Rate | 4GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP33MNR4G Overview
This is a device supplied in the 8-VFDFN Exposed Pad package. It is configured using 8terminations. 3.3Vis enabled to operate in an extremely flexible manner due to its supply voltage. There are 1 terminations on the device. All component pins are equal to 8. Tape & Reel (TR)is the packaging method used for this package. As part of the circuit, there are 8pins that connect other components. Using [0], it can be mounted. Due to the fact that it is a member of the 100EPseries, it has a wide range of applications. A logic type of Divide-by-4 is adopted. Ideally, the operating temperature should be set to -40°C~85°C. There is a mounting type of Surface Mounton this device. Providing a voltage of 3V~5.5Vensures higher reliability of operation. Based on the Pbfree code, the result may be yes. This electronic device is equipped with the following features [0]. Further related parts can be found under its base part number 100EP33. From the voltage source, there is -4.5Vvoltage. In order to operate, it requires a voltage of [0]. There is a minimum supply voltage (Vsup) of 3V volts. The part is from Prescaler/Multivibrators family. This device is configured with 1 data/clock inputs.
MC100EP33MNR4G Features
Embedded in the 8-VFDFN Exposed Pad package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Operating supply voltage of 5.5V
MC100EP33MNR4G Applications
There are a lot of ON Semiconductor MC100EP33MNR4G Counters & Dividers applications.
- Digital multiplexing and demultiplexing
- Divide-by"N" counters/frequency synthesizers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Time Out Timer for Consumer-Application Industrial Controls
- Programmable decade counters
- Programmable binary and decade
- Clocks
- Divide-by-N counting
- Frequency dividers
- DIVISION
