MC100EP35D
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 100EP |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | JK Type |
| Terminal Finish | TIN LEAD |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 2 |
| Clock Frequency | 3GHz |
| Current - Quiescent (Iq) | 50mA |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 0.49 ns |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MC100EP35D Overview
8-SOIC (0.154, 3.90mm Width)is the packaging method. The Tubepackage contains it. This output is configured with Differential. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The JK flip flop operates at -3V~-5.5Vvolts. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type JK Typeof flip flops. In terms of FPGAs, it belongs to the 100EP series. It should not exceed 3GHzin its output frequency. There are 1 elements in it. There is a consumption of 50mAof quiescent energy. A total of 8 terminations have been made. A voltage of 3.3V is used as the power supply for this D latch. 2bits are used in its design. 5.5Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 3V. Furthermore, it has NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vas a characteristic.
MC100EP35D Features
Tube package
100EP series
2 Bits
MC100EP35D Applications
There are a lot of Rochester Electronics, LLC MC100EP35D Flip Flops applications.
- High Performance Logic for test systems
- Convert a momentary switch to a toggle switch
- Bounce elimination switch
- Synchronous counter
- Memory
- Latch
- Reduced system switching noise
- Power down protection
- CMOS Process
- Computers
