MC100EP51DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP51 |
| Function | Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 450 ps |
| Turn On Delay Time | 375 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 45mA |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Trigger Type | Positive, Negative |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 47mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP51DTR2G Overview
The package is in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). It is included in the package Tape & Reel (TR). This output is configured with Differential. The trigger configured with it uses Positive, Negative. Surface Mountis in the way of this electric part. It operates with a supply voltage of -3V~-5.5V. -40°C~85°C TAis the operating temperature. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 100EP series. You should not exceed 3GHzin its output frequency. During its operation, it consumes 45mA quiescent energy. Currently, there are 8 terminations. JK flip flop belongs to 100EP51 family. It is powered from a supply voltage of 3.3V. There is an electronic part mounted in the way of Surface Mount. A total of 8pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 1bits in its design. It reaches the maximum supply voltage (Vsup) at 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 3V. In order to achieve its superior flexibility, 1 circuits are used. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of -4.5V watts. Additionally, you may refer to the additional NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V of the electronic flip flop. A high level output current of -50mAis set. 50mAis set as the low level output current.
MC100EP51DTR2G Features
Tape & Reel (TR) package
100EP series
8 pins
1 Bits
-4.5V power supplies
MC100EP51DTR2G Applications
There are a lot of ON Semiconductor MC100EP51DTR2G Flip Flops applications.
- Parallel data storage
- Data transfer
- Counters
- Shift registers
- Communications
- ESD protection
- ATE
- Common Clocks
- Differential Individual
- Functionally equivalent to the MC10/100EL29
