MC100EP51MNR4G
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Output Current | 50mA |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 450 ps |
| Turn On Delay Time | 375 ps |
| Current - Quiescent (Iq) | 45mA |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Trigger Type | Positive, Negative |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 47mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100EP |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP51 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
MC100EP51MNR4G Overview
8-VFDFN Exposed Padis the way it is packaged. It is included in the package Tape & Reel (TR). T flip flop uses Differentialas the output. It is configured with the trigger Positive, Negative. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a -3V~-5.5Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 100EPseries of FPGAs. You should not exceed 3GHzin its output frequency. As a result, it consumes 45mA quiescent current. In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 100EP51 family contains it. An input voltage of 3.3Vpowers the D latch. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 8 pins. Its clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 1bits in its design. It reaches the maximum supply voltage (Vsup) at 5.5V. For normal operation, the supply voltage (Vsup) should be above 3V. Using 1 circuits, it is highly flexible. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. There are -4.5V power supplies attached to it. This T flip flop features a maximum design flexibility due to its output current of 50mA. It is also characterized by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V. In this case, the high level output current is set to -50mA. A 50mAvalue is set for low-level output current.
MC100EP51MNR4G Features
Tape & Reel (TR) package
100EP series
8 pins
1 Bits
-4.5V power supplies
MC100EP51MNR4G Applications
There are a lot of ON Semiconductor MC100EP51MNR4G Flip Flops applications.
- Instrumentation
- Registers
- Computers
- Balanced Propagation Delays
- Communications
- Pattern generators
- Latch-up performance
- Memory
- 2 – Bit synchronous counter
- Count Modes
