MC100EP52MNR4G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100EP |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP52 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Output Current | 50mA |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 380 ps |
| Turn On Delay Time | 330 ps |
| Current - Quiescent (Iq) | 45mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive, Negative |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 47mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP52MNR4G Overview
It is packaged in the way of 8-VFDFN Exposed Pad. Package Tape & Reel (TR)embeds it. Differentialis the output configured for it. It is configured with a trigger that uses a value of Positive, Negative. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of -3V~-5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 100EPseries FPGA. You should not exceed 3GHzin the output frequency of the device. There is 45mA quiescent consumption. A total of 8 terminations have been made. The 100EP52 family contains it. The D flip flop is powered by a voltage of 3.3V . A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 8. Its clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. This flip flop is designed with 1 Bits. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 3V. 1 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from -4.5V power supplies. With a current output of 50mA , it offers maximum design flexibility. As an additional reference, you may refer to electronic flip flop NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V. A -50mAis set for the high level output current. In the low level output current setting, 50mAis used.
MC100EP52MNR4G Features
Tape & Reel (TR) package
100EP series
8 pins
1 Bits
-4.5V power supplies
MC100EP52MNR4G Applications
There are a lot of ON Semiconductor MC100EP52MNR4G Flip Flops applications.
- Frequency division
- 2 – Bit synchronous counter
- Bounce elimination switch
- Functionally equivalent to the MC10/100EL29
- Bus hold
- Memory
- Load Control
- Test & Measurement
- Balanced Propagation Delays
- Frequency Dividers
