Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2008 |
Series |
100EP |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
Differential Digital Multiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
Packing Method |
RAIL |
Technology |
ECL |
Voltage - Supply |
±3V~5.5V |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
100EP56 |
Pin Count |
20 |
Number of Outputs |
1 |
Circuit |
2 x 2:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
-4.5V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
2 |
Throw Configuration |
DPST |
Propagation Delay |
470 ps |
Quiescent Current |
63mA |
Logic Function |
Multiplexer |
Output Characteristics |
SERIES-RESISTOR |
Supply Type |
Dual |
Prop. Delay@Nom-Sup |
0.5 ns |
High Level Output Current |
-50mA |
Low Level Output Current |
50mA |
Power Supply Current-Max (ICC) |
80mA |
Voltage Supply Source |
Dual Supply |
Independent Circuits |
1 |
Length |
6.5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Lead Free |
MC100EP56DT Overview
This is a relatively small item of digital switch that is included in the 20-TSSOP (0.173, 4.40mm Width) in order to save space on the board.The package is in the form of Tube.Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC is indicated by Differential Digital Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with ±3V~5.5V voltage.The multiplexers from 100EP series can be used for a wide range of applications.There are 20 terminations included in its basic configuration.There is a base part number 100EP56 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 3.3V voltage.Signal switch has 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Dual is employed as its supply type.With 20 pins, it is configured.It is mounted in the way of Surface Mount.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 3V.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.For mux switch's normal operation, there is a power supply provided at -4.5V.In order for the turn signal switch to work, there are 1 outputs.Without the influence of external factors, it consumes 63mA current of multiplexer ic.A RAIL packaging method is used in the switches.Also, it provides an improved version of the characteristics of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.Normally, the digitalswitch consists of 2 circuits.
MC100EP56DT Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
Power supplies of -4.5V
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC100EP56DT Applications
There are a lot of ON Semiconductor MC100EP56DT Signal Switches / Multiplexers / Decoders applications.
- Audio transmission
- Microprocessor input/output systems
- Data bus control
- Metal detectors
- Solenoid cooling fan
- Speed control of medern motors
- Electronics industry
- Automatic Monitoring systems
- Data transfer
- A/D converters