MC100EP56DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 100EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP56 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 2 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 470 ps |
| Turn On Delay Time | 500 ps |
| Logic Function | Multiplexer |
| Number of Inputs | 4 |
| Max Input Voltage | 2.42V |
| Output Characteristics | SERIES-RESISTOR |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Max Frequency | 3GHz |
| Prop. Delay@Nom-Sup | 0.5 ns |
| High Level Output Current | -50mA |
| Dual Supply Voltage | 5.5V |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 80mA |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP56DTG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 20-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tube.Surface Mount is the mounting method digital switch ic uses.As the analog part, the circuit uses an analog IC Differential Digital Multiplexer.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.The turn signal switch is designed for use with a ±3V~5.5V supply voltage, which gives it a lot of flexibility.In addition to being a member of the 100EP series, these multiplexers have a wide range of applications.Among its basic features are 20 terminations.To find signal switch's related components, a base part number of 100EP56 may also be used.The multiplexer is supplied with 3.3V voltage.Currently, this turn signal switch has a total of 20 component pins.A conductor terminates at GULL WING.In this case, Dual is employed as the supply type.This multiplexer ic is configured with 20 pins.The mounting is in the way of Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.The turn signal switch has 1 outputs.This multiplexer is equipped with 4 inputs and 4 outputs.In accordance with RAIL, switches can be packaged.This turn signal switch's circuit is based on a circuit with 2 channels.
MC100EP56DTG Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
MC100EP56DTG Applications
There are a lot of ON Semiconductor MC100EP56DTG Signal Switches / Multiplexers / Decoders applications.
- Code converters
- Data collection system
- Encrypted communications system
- Data-routing applications
- Combinational circuit
- Implementing boolean functions with multiple variables
- Image transmission
- Medium scale TV wall
- Data bus control
- RF-based home automation system
