Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
Series |
100EP |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
Differential Digital Multiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
Subcategory |
Multiplexer/Demultiplexers |
Packing Method |
TAPE AND REEL |
Technology |
ECL |
Voltage - Supply |
±3V~5.5V |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
100EP56 |
Pin Count |
20 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Circuit |
2 x 2:1 |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
3V |
Number of Channels |
2 |
Throw Configuration |
SPDT |
Propagation Delay |
470 ps |
Turn On Delay Time |
500 ps |
Logic Function |
Mux |
Number of Inputs |
4 |
Output Characteristics |
SERIES-RESISTOR |
Supply Type |
Dual |
Output Polarity |
COMPLEMENTARY |
Prop. Delay@Nom-Sup |
0.5 ns |
Power Supply Current-Max (ICC) |
80mA |
Voltage Supply Source |
Dual Supply |
Independent Circuits |
1 |
Length |
6.5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Lead Free |
MC100EP56DTR2 Overview
As a means of saving space, digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC in the multiplexers is identified as Differential Digital Multiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a ±3V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 100EP series, these multiplexers have a wide range of applications.There is a design for terminating 20 as part of its basic configuration.The base part number is 100EP56, which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 3.3V.This turn signal switch has 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Dual is employed as the supply type.This multiplexer ic is configured with 20 pins.The multiplexer ic is mounted in the direction of Surface Mount.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.The turn signal switch operates with 1 outputs.In electronic terms, the digital switch ic is classified as part number Multiplexer/Demultiplexers.The multiplexer provides 4 inputs.The switches package is packaged in accordance with the TAPE AND REEL method.This turn signal switch's circuit is based on a circuit with 2 channels.It also provides improved characteristics of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.
MC100EP56DTR2 Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC100EP56DTR2 Applications
There are a lot of ON Semiconductor MC100EP56DTR2 Signal Switches / Multiplexers / Decoders applications.
- Data demultiplexing
- Data distribution
- Frequency multiplexing system
- Video transmission
- Medical industry
- Signal router
- Data-routing applications
- Electronic circuits
- Steel plants
- Metal detectors