MC100EP56DTR2G

20 Terminations±3V~5.5V 20 Pin 100EP56 Signal switch100EP Series 1 Outputs2 Functions

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC100EP56DTR2G
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 877
Description: 20 Terminations±3V~5.5V 20 Pin 100EP56 Signal switch100EP Series 1 Outputs2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Number of Pins	20
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2005
Series	100EP
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Type	Differential Digital Multiplexer
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
Subcategory	Multiplexer/Demultiplexers
Packing Method	TAPE AND REEL
Technology	ECL
Voltage - Supply	±3V~5.5V
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	100EP56
Pin Count	20
Number of Outputs	1
Circuit	2 x 2:1
Supply Voltage-Max (Vsup)	5.5V
Supply Voltage-Min (Vsup)	3V
Throw Configuration	SPDT
Propagation Delay	470 ps
Turn On Delay Time	500 ps
Logic Function	Multiplexer, Mux
Number of Inputs	4
Max Input Voltage	2.415V
Output Characteristics	SERIES-RESISTOR
Halogen Free	Halogen Free
Supply Type	Dual
Output Polarity	COMPLEMENTARY
Prop. Delay@Nom-Sup	0.5 ns
High Level Output Current	-50mA
Low Level Output Current	50mA
Power Supply Current-Max (ICC)	80mA
Number of Input Lines	2
Voltage Supply Source	Dual Supply
Independent Circuits	1
Length	6.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MC100EP56DTR2G Overview

The reason it is provided is that the board space can be saved by placing digital switch in the 20-TSSOP (0.173, 4.40mm Width).The package is in the form of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Differential Digital Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a ±3V~5.5V supply voltage, which gives it a lot of flexibility.Since they are members of the 100EP series, they can be used in a wide variety of applications.There are 20 terminations included in its basic configuration.In addition, it also has a base part number of 100EP56, which can be used to find related parts.The multiplexer's system is powered by 3.3V volts.This turn signal switch contains 20 component pins.Conductors terminate at GULL WING in this design.Its supply type is Dual, which is used as the source of power.The board is configured with 20 pins.The mounting is in the way of Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.The turn signal switch has 1 outputs.The digital switch ic is a part of an electronic system classified as Multiplexer/Demultiplexers.The multiplexer is equipped with 4 inputs.Currently, the switches is packaged in accordance with the TAPE AND REEL method.On the multiplexers, 2 input lines are provided for accepting voltage levels.Additionally, it improves the characteristics of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.

MC100EP56DTR2G Features

Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V