MC100EP56DWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP56 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 2 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | DPST |
| Propagation Delay | 470 ps |
| Turn On Delay Time | 500 ps |
| Logic Function | Multiplexer |
| Number of Inputs | 4 |
| Max Input Voltage | 2.42V |
| Output Characteristics | SERIES-RESISTOR |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Max Frequency | 3GHz |
| Prop. Delay@Nom-Sup | 0.5 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 80mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP56DWG Overview
Due to the lack of space on the board, digital switch is provided in the 20-SOIC (0.295, 7.50mm Width).The package is packaged in the manner of Tube.In terms of mounting, digital switch ic uses the Surface Mount method .As the analog part, the circuit uses an analog IC Differential Digital Multiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.The turn signal switch is designed for use with a ±3V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers from 100EP series can be used for a wide range of applications.The basic configuration of this system includes 20 terminations.The part number for 100EP56 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 3.3V is supplied.There are 20 component pins in this turn signal switch.A conductor terminates at GULL WING.Its supply type is Dual, which is used as the source of power.A configuration of 20 pins is used.The mounting is in the way of Surface Mount.Keep Vsup at 3V to avoid unnecessary failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.As a result, the turn signal switch consists of 1 outputs.It has 4 inputs.The signal switching is packaged by RAIL. Voltage levels are accepted through 2 input lines of multiplexers.In addition, NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V exhibits improved characteristics.
MC100EP56DWG Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Dual
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC100EP56DWG Applications
There are a lot of ON Semiconductor MC100EP56DWG Signal Switches / Multiplexers / Decoders applications.
- VGA
- Logic circuits
- Decimal decoder
- Data-routing applications
- Make full adder
- Electronic circuits
- Implementing boolean functions with multiple variables
- Enabling different functions units in microprocessor instruction decoding
- Audio transmission
- Metal detectors
