banner_page

MC100EP56MNG

20 Terminations±3V~5.5V 20 Pin 100EP56 Signal switch100EP Series 2 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC100EP56MNG
  • Package: 20-VFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 336
  • Description: 20 Terminations±3V~5.5V 20 Pin 100EP56 Signal switch100EP Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-VFQFN Exposed Pad
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
Published 2005
Series 100EP
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Type Differential Digital Multiplexer
Terminal Finish Tin (Sn)
Subcategory Multiplexer/Demultiplexers
Packing Method RAIL
Technology ECL
Voltage - Supply ±3V~5.5V
Terminal Position QUAD
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Base Part Number 100EP56
Pin Count 20
Operating Supply Voltage 5V
Circuit 2 x 2:1
Supply Voltage-Min (Vsup) 3V
Propagation Delay 470 ps
Turn On Delay Time 500 ps
Logic Function Multiplexer, Mux
Output Characteristics SERIES-RESISTOR
Halogen Free Halogen Free
Supply Type Dual
Output Polarity COMPLEMENTARY
Prop. Delay@Nom-Sup 0.5 ns
High Level Output Current -50mA
Low Level Output Current 50mA
Power Supply Current-Max (ICC) 80mA
Number of Input Lines 4
Voltage Supply Source Dual Supply
Independent Circuits 1
Number of Output Lines 2
Height 950μm
Length 4mm
Width 4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MC100EP56MNG Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 20-VFQFN Exposed Pad.The package is in the form of Tube.The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC Differential Digital Multiplexer is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at ±3V~5.5V voltage.Since they are members of the 100EP series, they can be used in a wide variety of applications.As parts of its basic configuration, 20 terminations are desgined.There is a base part number 100EP56 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 3.3V volts.There are 20 component pins in this turn signal switch.Dual is used as its supply type.With 20 pins, it is configured.Multiplexer ics are mounted in the direction of Surface Mount.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 3V.In electronic terms, the digital switch ic is classified as part number Multiplexer/Demultiplexers.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.RAIL is used to package the switches.On the multiplexers, 4 input lines are provided for accepting voltage levels.In this case, the signal source has a total of 2 output lines.

MC100EP56MNG Features


Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Dual
Operating with the supply voltage of 5V
4 input lines
2 output lines

MC100EP56MNG Applications


There are a lot of ON Semiconductor MC100EP56MNG Signal Switches / Multiplexers / Decoders applications.

  • RF-based home automation system
  • A robotic vehicle with the metal detector
  • Relay
  • Computer memory
  • Data distribution
  • Logic gates for other digital devices
  • Code conversion
  • Paper plants
  • Electronically controlled engine system
  • Analog to digital conversion

Write a review

Note: HTML is not translated!
    Bad           Good