MC100EP56MNTXG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 100EP56 |
| Pin Count | 20 |
| Circuit | 2 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 470 ps |
| Turn On Delay Time | 500 ps |
| Logic Function | Multiplexer, Mux |
| Output Characteristics | SERIES-RESISTOR |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.5 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 80mA |
| Number of Input Lines | 4 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 2 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EP56MNTXG Overview
Digital switch is provided in the 20-VFQFN Exposed Pad for the purpose of saving board space.In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC used in the multiplexers can be referred to as Differential Digital Multiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with ±3V~5.5V voltage.These multiplexers are members of the 100EP series, which provide extensive application potential.Among its basic features are 20 terminations.Its logic switch base part number is 100EP56 which can also be used to find its logic switch related parts.In this case, 3.3V is the voltage supplied to the multiplexer's system.This turn signal switch has 20 component pins.As a type of supply, Dual is employed.Currently, it is configured with 20 pins.The multiplexer ic is mounted in the direction of Surface Mount.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 3V.Avoid unnecessary failures by keeping Vsup at 5.5V.The digital switch ic is an electronic part classified into Multiplexer/Demultiplexers.The switches packaging is based on TAPE AND REEL.Voltage levels are accepted through 4 input lines of multiplexers.As the signal source, there are 2 output lines.Additionally, it improves the characteristics of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.
MC100EP56MNTXG Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Dual
4 input lines
2 output lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC100EP56MNTXG Applications
There are a lot of ON Semiconductor MC100EP56MNTXG Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Enabling different rows of memory depending on address in memory chips
- Data transfer
- Implementing boolean functions with multiple variables
- Code converters
- To select different devices in microprocessor input
- Textile mills
- Enabling block of memory depending on address in memory chips
- War field flying robot with a night vision flying camera
- Enabling different functions units in microprocessor instruction decoding
