MC100EP57DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V; |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP57 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 1 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Throw Configuration | DPST |
| Propagation Delay | 475 ps |
| Quiescent Current | 52mA |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 4 |
| Supply Type | Dual |
| Prop. Delay@Nom-Sup | 0.52 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 65mA |
| Voltage Supply Source | Dual Supply |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
MC100EP57DT Overview
In order to save board space, digital switch is located in the 20-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Differential Digital Multiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at ±3V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers from 100EP series can be used for a wide range of applications.There is a design for terminating 20 as part of its basic configuration.As its base part number is 100EP57, logic switch can also be used to find its related parts.The multiplexer's system is powered by 3.3V volts.A component pin count of 20 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.As a type of supply, Dual is employed.This multiplexer ic has 20 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 5.5V.In order for the turn signal switch to work, there are 1 outputs.In electronic terms, the digital switch ic is classified as Multiplexer/Demultiplexers.Not being affected by the external factors, consumes 52mA current of multiplexer ic.This multiplexer has a total of 4 inputs.In accordance with RAIL, switches can be packaged.Additionally, NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V; provides improved characteristics.To operate the digitalswitch normally, 1 circuits are formed.
MC100EP57DT Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;
MC100EP57DT Applications
There are a lot of ON Semiconductor MC100EP57DT Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Data transfer
- Seven segment displays
- Medium scale TV wall
- Decimal decoder
- War field flying robot with a night vision flying camera
- Automation system
- Audio transmission
- Recording transmission
- Computer memory
