MC100EP57MNG
| Parameters | |
|---|---|
| Voltage Supply Source | Dual Supply |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V; |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP57 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 1 x 4:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 475 ps |
| Logic Function | Multiplexer, Mux |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.52 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 65mA |
| Number of Input Lines | 4 |
MC100EP57MNG Overview
In order to conserve board space, digital switch is included in the 20-VFQFN Exposed Pad.In this case, it is packaged as Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC is indicated by Differential Digital Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of ±3V~5.5V, designers have greater flexibility of digital controlled switch.Since they are members of the 100EP series, they can be used in a wide variety of applications.Among its basic features are 20 terminations.The base part number is 100EP57, so you can find its logic switch related parts using that number.The multiplexer's system works with 3.3V voltage.There are 20 component pins in this turn signal switch.In this case, the supply type is Dual.This multiplexer ic is configured with 20 pins.As you can see, it is mounted in the direction of Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.The turn signal switch contains 1 outputs designed to operate.This is an the digital switch ic that is classified as Multiplexer/Demultiplexers.A RAIL packaging method is used in the switches.The multiplexers have 4 input lines used to accept voltage levels.Additionally, NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V; has improved characteristics.
MC100EP57MNG Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Dual
4 input lines
NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;
MC100EP57MNG Applications
There are a lot of ON Semiconductor MC100EP57MNG Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- Textile mills
- Seven segment displays
- Make half adder
- VGA
- Communication system
- Microprocessor instruction decoding
- Memory chips
- To select different devices in microprocessor input
- Home automation system
