MC100EP58DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 100EP |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100EP58 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | SPDT |
| Propagation Delay | 410 ps |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100EP58DR2 Overview
Due to the lack of space on the board, digital switch is provided in the 8-SOIC (0.154, 3.90mm Width).It is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.the multiplexers uses IC Multiplexer as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of ±3V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers in the 100EP series are suitable for a wide range of applications.As part of its basic configuration, 8 terminations are designed as a part of it.The base part number is 100EP58, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 3.3V is supplied.This turn signal switch has 8 component pins.As the end of conductors, it uses GULL WING.In this case, the supply type is Dual.Currently, it is configured with 8 pins.It is mounted in the way of Surface Mount.The minimal supply voltage (Vsup) should be kept at 3V to avoid some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 5.5V.Normally, -4.5V is powered by a battery.In order for the turn signal switch to work, there are 1 outputs.The signal switching is packaged by TAPE AND REEL. On the multiplexers, 2 input lines are provided for accepting voltage levels.Furthermore, the characteristics of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V have been improved.
MC100EP58DR2 Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
Power supplies of -4.5V
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC100EP58DR2 Applications
There are a lot of ON Semiconductor MC100EP58DR2 Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Data transfer
- Code converters
- To select different devices in microprocessor input
- Data communication
- Data distribution
- A/D converters
- Signal router
- Electronics industry
- To select different task for memory in microprocessor memory systems
