MC100EP58DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP58 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | DPST |
| Propagation Delay | 410 ps |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP58DTG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).As a result, it is packaged in the way of Tube.Mounting is performed using Surface Mount.Multiplexer is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.A supply voltage of ±3V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers in the 100EP series are suitable for a wide range of applications.Its basic configuration includes terminations in the 8 range.The base part number is 100EP58, which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemThis turn signal switch has 8 component pins.GULL WING represents the end of conductors.Dual is employed as its supply type.A configuration of 8 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.There is a power supply provided for the mux switch's normal operation of -4.5V.For the turn signal switch's operation, there are 1 outputs.The switches packaging is based on RAIL.Voltage levels are accepted through 2 input lines of multiplexers.In addition, NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V exhibits improved characteristics.
MC100EP58DTG Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Dual
Power supplies of -4.5V
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC100EP58DTG Applications
There are a lot of ON Semiconductor MC100EP58DTG Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Enabling different rows of memory depending on address in memory chips
- Data bus control
- Data demultiplexing
- Data distribution
- Control unit of Central Processing unit (CPU)
- Make full adder
- Code conversion
- Injectors
- Electronics industry
