MC100EP58DTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP58 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | SPDT |
| Propagation Delay | 410 ps |
| Logic Function | Multiplexer, Mux |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EP58DTR2G Overview
Digital switch is provided in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.As the analog part, the circuit uses an analog IC Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of ±3V~5.5V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 100EP series, which provide extensive application potential.As parts of its basic configuration, 8 terminations are desgined.The part number for 100EP58 can be used to find its logic switch related parts as well.The multiplexer's system works with 3.3V voltage.Currently, this turn signal switch has a total of 8 component pins.As a result, GULL WING represents the end of the conductors.As a type of supply, Dual is employed.A configuration of 8 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.Keeping Vsup at 3V will prevent some unwanted failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to -4.5V.The turn signal switch contains 1 outputs designed to operate.A TAPE AND REEL packaging method is used in the switches.For the purpose of accepting voltage levels, the multiplexers have 2 input lines.It also provides improved characteristics of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.
MC100EP58DTR2G Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Dual
Power supplies of -4.5V
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC100EP58DTR2G Applications
There are a lot of ON Semiconductor MC100EP58DTR2G Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- Automation system
- Electronically controlled engine system
- Data demultiplexing
- Relay
- Recording transmission
- Signal router
- Night vision cameras
- Enabling different rows of memory depending on address in memory chips
- Data transfer
