MC100EP90DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP90 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Power Supplies | -4.5V |
| Number of Channels | 3 |
| Number of Circuits | 1 |
| Max Supply Voltage | -5.5V |
| Min Supply Voltage | -3V |
| Number of Bits | 1 |
| Propagation Delay | 340 ps |
| Turn On Delay Time | 340 ps |
| Logic Function | Translator |
| Output Characteristics | OPEN-EMITTER |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 50mA |
| Negative Supply Voltage-Nom | -3.3V |
| Output Signal | PECL, LVPECL |
| Translator Type | Mixed Signal |
| Input Signal | ECL |
| Output Latch or Register | NONE |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
MC100EP90DTR2 Overview
Embedded in the 20-TSSOP (0.173, 4.40mm Width) package, it is now available to you.The package is in the form of Tape & Reel (TR).Level translators uses Differential as level translatorss output configuration.Translator type Mixed Signal is assigned to this electrical device.Surface Mount is the method used for mounting this electronic part.Level translators has the Channel type Unidirectional.There is -40°C~85°C TA operating temperature.Due to its superior flexibility, it uses 1 circuits.To end a transmission line, there are 20 types of termination that can be used.According to the base part number 100EP90, its related parts can be founded.A supply voltage of 3.3V powers it.Level translators is equipped wLevel translatorsh 20 pin count.The device is part of the 100EP series.With 20 pins, it is designed.The design of this electronic part is based on 1 bits.-5.5V is the maximum supply voltage it can handle.The minimal voltage for operation is -3V.This mount is done using the method of Surface Mount.Channel count is 3.This device runs on a -4.5V power supply.
MC100EP90DTR2 Features
20-TSSOP (0.173, 4.40mm Width) package
1 circuits
20 pin count
100EP series
20 pins
-4.5V power supplies
MC100EP90DTR2 Applications
There are a lot of ON Semiconductor MC100EP90DTR2 voltage translators & level shifters applications.
- Debouncing a Mechanical Switch
- One Assembly and Test Site
- One Fabrication Site
- SDIO
- Extended Product-Change Notification
- Advanced Driver Assistance System (ADAS)
- LCD Panels Using GIP / GOA / ASG Technology
- UART
- Industrial Equipment
- Industrial equipment
