MC100EP91DWG
| Parameters | |
|---|---|
| Output Signal | NECL |
| Translator Type | Mixed Signal |
| Input Signal | CML, HSTL, LVCMOS, LVDS, LVPECL, LVTTL |
| Delay-Max | 0.75 ns |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP91 |
| Pin Count | 20 |
| Number of Outputs | 6 |
| Output Type | Differential |
| Number of Channels | 3 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.8V |
| Min Supply Voltage | 2.375V |
| Output Current | 50mA |
| Number of Bits | 1 |
| Propagation Delay | 675 ps |
| Turn On Delay Time | 675 ps |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 50mA |
MC100EP91DWG Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it.This package has the format of Tube.Level translators is configured wlevel translatorsh an output of Differential.Level translators has the translator type Mixed Signal.This electronic part is mounted in the way of Surface Mount.Unidirectional is the Channel type of this electrical device.A temperature of -40°C~85°C TA is used for operation.1 circuits are used to achieve its superior flexibility.To end a transmission line, there are 20 types of termination that can be used.Level translators is possible to determine Level translatorss related parts using the base part number 100EP91.Level translators is powered by a 3.3V supply.The pin count of this device is 20.In terms of its design, it is a member of the 100EP series.In addition, it is designed with a pin number of 20.The design of this electronic part is based on 1 bits.There is a maximum voltage of 3.8V supported.Level translators operates wLevel translatorsh the minimal supply voltage of 2.375V.Level translators has been mounted wLevel translatorsh the method of Surface Mount.Channels are set to 3.In Other Interface ICs, this part is included.If the supply voltage is kept at 50mA, a high level of efficiency can be achieved.There are no outputs configured on it.
MC100EP91DWG Features
20-SOIC (0.295, 7.50mm Width) package
1 circuits
20 pin count
100EP series
20 pins
6 outputs
MC100EP91DWG Applications
There are a lot of ON Semiconductor MC100EP91DWG voltage translators & level shifters applications.
- Debouncing a Mechanical Switch
- Public Signage
- Test Site
- Extended Product-Change Notification
- Routers (Telecom Switching Equipment)
- Tablet PCs
- Electronic Points of Sale
- SMBus
- Personal Electronics
- Extended Product Life Cycle
