MC100EPT23DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 100EPT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EPT23 |
| Pin Count | 8 |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Output Current | 50mA |
| Number of Bits | 1 |
| Propagation Delay | 1.8 ns |
| Turn On Delay Time | 2.4 ns |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Output Signal | LVTTL, LVCMOS |
| Translator Type | Mixed Signal |
| Input Signal | CML, LVDS, LVPECL |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EPT23DTG Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) contains it.Tube is the way it is packaged.Level translators uses Non-Inverted as level translatorss output configuration.The translator type of this electrical device is Mixed Signal.Mounting this electronic component follows the Surface Mount method.This electrical device has channel type Unidirectional.A temperature of -40°C~85°C TA is used for operation.Its superior flexibility is achieved by using 1 circuits.Transmission lines can be terminated using 8 terminations to end them.Parts related to a base part number 100EPT23 are designated by the same number.In order to power the device, a voltage supply of 3.3V is required.Level translators has 8 pins.There is one device in the 100EPT series, and it belongs to that series.The board has 8 pins.1 Bits are used in the design of this electronic part.Voltages above 3.6V are supported.In order for the machine to operate, the supply voltage must be 3V.Using the method of Surface Mount, this electronic component is mounted.There are 2 channels.Due to the 50mA output current, it provides maximum design flexibility.Optimal efficiency requires 3.3V as the supply voltage.
MC100EPT23DTG Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
1 circuits
8 pin count
100EPT series
8 pins
MC100EPT23DTG Applications
There are a lot of ON Semiconductor MC100EPT23DTG voltage translators & level shifters applications.
- Tablet PCs
- Controlled Baseline
- Eliminate slow or noisy input signals
- I2C / SMBus
- Extended Product-Change Notification
- Industrial equipment
- Infotainment Head Unit
- Handset
- General purpose I/O level shifting
- Extended Product Life Cycle
