MC100EPT24DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 100EPT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EPT24 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Power Supplies | -4.5V |
| Number of Channels | 1 |
| Max Supply Voltage | -3.6V |
| Min Supply Voltage | -3V |
| Number of Bits | 1 |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 800 ps |
| Logic Function | Translator |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 50mA |
| Negative Supply Voltage-Nom | -3.3V |
| Output Signal | LVPECL |
| Translator Type | Mixed Signal |
| Input Signal | LVCMOS, LVTTL |
| Output Latch or Register | NONE |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EPT24DTR2G Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package contains it.A Tape & Reel (TR) package is used to package it.Level translators is configured wlevel translatorsh an output of Differential.There is Mixed Signal translator type for this electrical device.Mounting this electronic component follows the Surface Mount method.There is Unidirectional channel type for this electrical device.Level translators is -40°C~85°C TA at the operating temperature.0 terminations are used to end transmission lines.Parts related to a base part number 100EPT24 are designated by the same number.Power comes from a voltage of 3.3V.The pin count of this device is 8.This is a device from the 100EPT series.Designed with 8 pins, it is compatible with a wide range of devices.Electronic parts are designed with a number of bits of 1.Voltages above -3.6V are supported.There is a minimum supply voltage of -3V for it.Level translators has been mounted wLevel translatorsh the method of Surface Mount.1 channels are available.In order for Level translators to operate, level translators needs a power supply of -4.5V.
MC100EPT24DTR2G Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
100EPT series
8 pins
-4.5V power supplies
MC100EPT24DTR2G Applications
There are a lot of ON Semiconductor MC100EPT24DTR2G voltage translators & level shifters applications.
- Test Site
- Tablet PCs
- Wireless and Telecom Infrastructures
- Power-sensitive applications
- One Fabrication Site
- General purpose I/O level shifting
- Extended Product Life Cycle
- One Fabrication Site
- Extended Product-Change Notification
- Eliminate Slow or Noisy Input Signals
