banner_page

MC100H642FN

MC100H642FN datasheet pdf and Clock/Timing - Application Specific product details from ON Semiconductor stock available at Noco


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC100H642FN
  • Package: 28-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 588
  • Description: MC100H642FN datasheet pdf and Clock/Timing - Application Specific product details from ON Semiconductor stock available at Noco(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Number of Pins 28
Operating Temperature 0°C~85°C
Packaging Tube
Published 2006
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Clock Drivers
Technology ECL
Voltage - Supply 4.75V~5.25V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 235
Number of Functions 1
Supply Voltage 5V
Base Part Number MC100H642
Output TTL
Pin Count 28
Operating Supply Voltage 5V
Power Supplies 5V
Number of Circuits 1
Frequency (Max) 100MHz
Input ECL, TTL
Ratio - Input:Output 2:8
Logic IC Type LOW SKEW CLOCK DRIVER
Max I(ol) 0.024 A
PLL No
Differential - Input:Output Yes/Yes
Prop. Delay@Nom-Sup 6.5 ns
Propagation Delay (tpd) 5.75 ns
Main Purpose 68030, 68040 MPUs
Same Edge Skew-Max (tskwd) 0.5 ns
Height Seated (Max) 4.57mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MC100H642FN Overview


The package Tube includes it. As part of the packaging, there is a serial number 28-LCC (J-Lead) associated with the product. A mounting type of Surface Mount is recommended. 28 terminations are present in it. Parts with 5V voltage are provided by the part. Run 235 using the peak reflow temperature of this part. 1 are present on the device. For normaloperation, 100MHz is the maximum frequency. Clock program varies the range of 0°C~85°C operating temperature. Clock program is possible for the component to supply a voltage of 4.75V~5.25V. The component's main purpose is 68030, 68040 MPUs. The output should be TTL. Of the part, there are 2006 publications. Searching for information is made easier by using the MC100H642 part number as the base number. Ideally, it should be mounted with Surface Mount. With 28 pins, the device is designed. The board has 28 pins. Circuits application is recommended to keep the supply voltage at 5V volts. This device belongs to the Clock Drivers family. Circuits application uses a logic IC type of LOW SKEW CLOCK DRIVER.

MC100H642FN Features


Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 235
Include 1 Circuits
run the output at th range of TTL
with 28 Pins
operate supply voltage at the range of 5V
Logic IC Type: LOW SKEW CLOCK DRIVER

MC100H642FN Applications


There are a lot of ON Semiconductor MC100H642FN application specific timer?applications.

  • Residential gateways
  • Carrier Ethernet switches
  • DSLAM
  • Test and Measurement
  • Industrial, Embedded Computing
  • Test and Measurement
  • BBU (Baseband Unit)
  • Networking/communication
  • Communications
  • Switches/routers

Write a review

Note: HTML is not translated!
    Bad           Good