MC100LVE164FAR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100LVE |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC=0 WITH VEE=-3V TO -3.8 |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±3V~3.8V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100LVE164 |
| Pin Count | 32 |
| Number of Outputs | 1 |
| Circuit | 1 x 16:1 |
| Supply Voltage-Max (Vsup) | 3.8V |
| Power Supplies | -3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 850 ps |
| Logic Function | Multiplexer, Mux |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.85 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 45mA |
| Number of Input Lines | 16 |
| Voltage Supply Source | Dual Supply |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100LVE164FAR2G Overview
Due to the fact that it is provided in the 32-LQFP, digital switch allows the board to be compacted.Tape & Reel (TR) is the packaging method.The mounting method digital switch ic uses is Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of ±3V~3.8V.provides digital controlled switch's digital controlled switch'sMultiplexers in the 100LVE series are suitable for a wide range of applications.It is designed with 32 terminations as part of its basic configuration.As its base part number is 100LVE164, logic switch can also be used to find its related parts.The multiplexer's system is powered by 3.3V voltage.Currently, this turn signal switch has a total of 32 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Dual.A configuration of 32 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.8V.In order to maintain mux switch's normal operation, power is provided to -3.3V.As a result, the turn signal switch consists of 1 outputs.Currently, the switches is packaged in accordance with the TAPE AND REEL method.A voltage level can be inserted into the 16 input lines of multiplexers.It also provides improved characteristics of NECL MODE: VCC=0 WITH VEE=-3V TO -3.8.
MC100LVE164FAR2G Features
Supplied in the 32-LQFP package
Adopting a supply type of Dual
Power supplies of -3.3V
16 input lines
NECL MODE: VCC=0 WITH VEE=-3V TO -3.8
MC100LVE164FAR2G Applications
There are a lot of ON Semiconductor MC100LVE164FAR2G Signal Switches / Multiplexers / Decoders applications.
- Communication system
- Data-routing applications
- Enabling different functions units in microprocessor instruction decoding
- Decimal decoder
- HDMI applications
- Robotic vehicles
- Time division multiplexing system
- Data distribution
- LVDS
- Transmission from the computer system of a satellite
