MC100LVEL31DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100LVEL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | ECL |
| Voltage - Supply | -3V~-3.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100LVEL31 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Power Supplies | -3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.9GHz |
| Propagation Delay | 590 ps |
| Turn On Delay Time | 475 ps |
| Logic Function | AND |
| Current - Quiescent (Iq) | 35mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive Edge |
| fmax-Min | 2900 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2900000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100LVEL31DTR2G Overview
The flip flop is packaged in a case of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). D flip flop is included in the Tape & Reel (TR)package. This output is configured with Differential. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of -3V~-3.8V volts. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. JK flip flop belongs to the 100LVELseries of FPGAs. This D flip flop should not have a frequency greater than 2.9GHz. During its operation, it consumes 35mA quiescent energy. It has been determined that there have been 8 terminations. You can search similar parts based on 100LVEL31. The power supply voltage is 3.3V. There is an electronic part that is mounted in the way of Surface Mount. A total of 8pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. The flip flop is designed with 1bits. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. Its superior flexibility is attributed to its use of 1 circuits. The system runs on a power supply of -3.3V watts.
MC100LVEL31DTR2G Features
Tape & Reel (TR) package
100LVEL series
8 pins
1 Bits
-3.3V power supplies
MC100LVEL31DTR2G Applications
There are a lot of ON Semiconductor MC100LVEL31DTR2G Flip Flops applications.
- Modulo – n – counter
- Functionally equivalent to the MC10/100EL29
- Data Synchronizers
- ESCC
- Buffer registers
- Matched Rise and Fall
- Differential Individual
- 2 – Bit synchronous counter
- Data transfer
- ATE
