MC100LVEL32DT
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100LVEL32 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Nominal Supply Current | 31mA |
| Reset | Asynchronous |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.6 ns |
| Power Supply Current-Max (ICC) | 36mA |
| fmax-Min | 2400 MHz |
| Max Frequency@Nom-Sup | 2200000000Hz |
| Count Rate | 2.6GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100LVEL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~3.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
MC100LVEL32DT Overview
The device is packaged in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)type. 8 terminations are used for its configuration. By supplying 3.3Vwith a voltage of 3.3V , the device can be operated in a completely flexible manner. In this diagram, there are 1elements that are interconnected by wires. There are a total of 8 pins in all components. As a result, it is packaged as Tube. A circuit is connected to other components by 8pins. It is mounted in the manner of [0]. The 100LVELseries offers a wide range of applications due to its versatility. In this case, the logic type is set to [0]. In this case, the operating temperature should be set to -40°C~85°C. There is a mounting type of Surface Mounton this device. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Among its base part number [0], you will find additional parts that are related. There is -4.5V voltage comes from the voltage source. There is 3V minimum supply voltage (Vsup) for this device. This electronic part belongs to the Prescaler/Multivibrators family. There are 1 data/clock inputs configured on this device.
MC100LVEL32DT Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
MC100LVEL32DT Applications
There are a lot of ON Semiconductor MC100LVEL32DT Counters & Dividers applications.
- Time Out Timer for Consumer-Application Industrial Controls
- Clocks
- SQUARING
- Divide-by-N counting
- Signal gating
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- ALGEBRAIC COMPUTATION
- VHF, UHF, FM, AM, etc.
- ANALOG SIGNAL PROCESSING
- Frequency division
