MC100LVEL33DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100LVEL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~3.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100LVEL33 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Number of Elements | 1 |
| Power Supplies | +-3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 900 ps |
| Turn On Delay Time | 900 ps |
| Reset | Asynchronous |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 39mA |
| Count Rate | 4GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100LVEL33DR2G Overview
This is a device supplied in the 8-SOIC (0.154, 3.90mm Width) package. In order to configure it, it uses 8terminations. By supplying 3.3Vwith a voltage of 3.3V , the device can be operated in a completely flexible manner. In this diagram, there are 1elements that are interconnected by wires. In total, there are 8pins on the component. As a result, it is packaged in the way of a Tape & Reel (TR). A circuit is connected to other components by 8pins. The Surface Mountway is used to mount it. With its 100LVELseries designation, it can be used for a range of applications. Divide-by-4is selected as the logic type. In this case, the operating temperature should be set to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. Providing a voltage of 3V~3.8Vensures higher reliability of operation. Using the Pbfree code, the result may be yes. Further related parts may be found under the base part number 100LVEL33. Voltage from the voltage source is [0]. There is a minimum supply voltage (Vsup) of 3V volts. The electronic components is from Prescaler/Multivibrators family. It is configured with 1 data/clock inputs. The system has sent 2outputs.
MC100LVEL33DR2G Features
Embedded in the 8-SOIC (0.154, 3.90mm Width) package
MC100LVEL33DR2G Applications
There are a lot of ON Semiconductor MC100LVEL33DR2G Counters & Dividers applications.
- ALGEBRAIC COMPUTATION
- ANALOG SIGNAL PROCESSING
- Fixed and programmable counters greater than 10
- Time Out Timer for Consumer-Application Industrial Controls
- Clocks
- Frequency division
- Control counters
- TRUE RMS-TO-DC CONVERSION
- Analog multiplexing and demultiplexing
- MULTIPLICATION
