MC100LVEL51DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100LVEL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-3.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100LVEL51 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Power Supplies | -3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 520 ps |
| Turn On Delay Time | 475 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 35mA |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.55 ns |
| Trigger Type | Positive, Negative |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 37mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2900000000Hz |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100LVEL51DR2G Overview
It is embeded in 8-SOIC (0.154, 3.90mm Width) case. A package named Tape & Reel (TR)includes it. In the configuration, Differentialis used as the output. It is configured with a trigger that uses Positive, Negative. Surface Mountis in the way of this electric part. A voltage of -3V~-3.8Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. It belongs to the 100LVELseries of FPGAs. A frequency of 2.8GHzshould be the maximum output frequency. As a result, it consumes 35mA quiescent current. The number of terminations is 8. The 100LVEL51family includes it. Power is supplied from a voltage of 3.3V volts. In this case, the electronic component is mounted in the way of Surface Mount. The 8pins are designed into the board. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 1bits in its design. A normal operating voltage (Vsup) should remain above 3V. In order to achieve its superior flexibility, 1 circuits are used. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. A power supply of -3.3Vis required to operate it. The high level output current is set to 50mA. The low level output current is set to 50mA.
MC100LVEL51DR2G Features
Tape & Reel (TR) package
100LVEL series
8 pins
1 Bits
-3.3V power supplies
MC100LVEL51DR2G Applications
There are a lot of ON Semiconductor MC100LVEL51DR2G Flip Flops applications.
- Latch
- Data transfer
- Computers
- Dynamic threshold performance
- Latch-up performance
- Event Detectors
- Functionally equivalent to the MC10/100EL29
- Patented noise
- Common Clocks
- Set-reset capability
