MC100LVEL51DTG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 100LVEL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -3V~-3.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100LVEL51 |
| Function | Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Power Supplies | -3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 520 ps |
| Turn On Delay Time | 475 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 35mA |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.55 ns |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 37mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2900000000Hz |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100LVEL51DTG Overview
As a result, it is packaged as 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). Package Tubeembeds it. In the configuration, Differentialis used as the output. JK flip flop uses Positive, Negativeas the trigger. It is mounted in the way of Surface Mount. Powered by a -3V~-3.8Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 100LVEL series. It should not exceed 2.8GHzin its output frequency. During its operation, it consumes 35mA quiescent energy. Currently, there are 8 terminations. You can search similar parts based on 100LVEL51. It is powered from a supply voltage of 3.3V. There is an electronic component mounted in the way of Surface Mount. There are 8pins on it. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. The flip flop is designed with 1bits. The supply voltage (Vsup) should be maintained above 3V for normal operation. Using 1 circuits, it is highly flexible. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. In order for the device to operate, it requires -3.3V power supplies.
MC100LVEL51DTG Features
Tube package
100LVEL series
8 pins
1 Bits
-3.3V power supplies
MC100LVEL51DTG Applications
There are a lot of ON Semiconductor MC100LVEL51DTG Flip Flops applications.
- Automotive
- Buffer registers
- Consumer
- Circuit Design
- Registers
- Test & Measurement
- Storage Registers
- Counters
- Balanced Propagation Delays
- 2 – Bit synchronous counter
