MC100LVEL51DTR2G
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 520 ps |
| Turn On Delay Time | 475 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 35mA |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.55 ns |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 37mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2900000000Hz |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100LVEL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-3.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100LVEL51 |
| Function | Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Power Supplies | -3.3V |
MC100LVEL51DTR2G Overview
As a result, it is packaged as 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). The Tape & Reel (TR)package contains it. In the configuration, Differentialis used as the output. It is configured with a trigger that uses a value of Positive, Negative. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of -3V~-3.8V volts, it operates. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. It belongs to the 100LVELseries of FPGAs. It should not exceed 2.8GHzin its output frequency. This process consumes 35mA quiescents. 8terminations have occurred. JK flip flop belongs to 100LVEL51 family. Power is provided by a 3.3V supply. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 8 pins. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. It is designed with 1bits. For normal operation, the supply voltage (Vsup) should be above 3V. Its flexibility is enhanced by 1 circuits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. An electrical current of -3.3V volts is applied to it.
MC100LVEL51DTR2G Features
Tape & Reel (TR) package
100LVEL series
8 pins
1 Bits
-3.3V power supplies
MC100LVEL51DTR2G Applications
There are a lot of ON Semiconductor MC100LVEL51DTR2G Flip Flops applications.
- Reduced system switching noise
- Automotive
- Memory
- Set-reset capability
- Latch
- Bounce elimination switch
- Power down protection
- Frequency division
- Circuit Design
- Cold spare funcion
