MC100LVEL51MNR4G
| Parameters | |
|---|---|
| Propagation Delay | 520 ps |
| Turn On Delay Time | 475 ps |
| Current - Quiescent (Iq) | 35mA |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.55 ns |
| Trigger Type | Positive, Negative |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 37mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2900000000Hz |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100LVEL |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-3.8V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100LVEL51 |
| Function | Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Power Supplies | -3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
MC100LVEL51MNR4G Overview
The flip flop is packaged in a case of 8-VFDFN Exposed Pad. There is an embedded version in the package Tape & Reel (TR). It is configured with Differentialas an output. There is a trigger configured with Positive, Negative. Surface Mountis occupied by this electronic component. Powered by a -3V~-3.8Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 100LVEL series. Its output frequency should not exceed 2.8GHz. During its operation, it consumes 35mA quiescent energy. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 100LVEL51 family. A voltage of 3.3V provides power to the D latch. It is mounted in the way of Surface Mount. 8pins are included in its design. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. Flip flops designed with 1bits are used in this part. Normally, the supply voltage (Vsup) should be kept above 3V. In order to achieve its superior flexibility, 1 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It runs on -3.3Vvolts of power. -50mA is set as the high level output current. 50mA is the low level output current.
MC100LVEL51MNR4G Features
Tape & Reel (TR) package
100LVEL series
8 pins
1 Bits
-3.3V power supplies
MC100LVEL51MNR4G Applications
There are a lot of ON Semiconductor MC100LVEL51MNR4G Flip Flops applications.
- Latch
- ESCC
- Load Control
- Matched Rise and Fall
- Guaranteed simultaneous switching noise level
- Consumer
- Individual Asynchronous Resets
- ATE
- Cold spare funcion
- Parallel data storage
