MC100LVEL56DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100LVEL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±3V~3.8V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100LVEL56 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Circuit | 2 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.8V |
| Power Supplies | -3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | SPDT |
| Propagation Delay | 620 ps |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 4 |
| Max Input Voltage | 2.42V |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100LVEL56DWR2G Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 20-SOIC (0.295, 7.50mm Width).It is packaged in the way of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.Differential Digital Multiplexer is the analog IC that the multiplexers uses.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at ±3V~3.8V, designers are provided with a greater degree of flexibility.Multiplexers from the 100LVEL series can be used in a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.In addition, it also has a base part number of 100LVEL56, which can be used to find related parts.In this case, 3.3V is the voltage supplied to the multiplexer's system.Signal switch has 20 component pins.As a result, conductors end at GULL WING.Dual is used as its supply type.Currently, it is configured with a 20 pin configuration.This unit is mounted in the way of Surface Mount.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.8V.Normally, -3.3V is powered by a battery.The turn signal switch has 2 outputs designed for operation.Multiplexer/Demultiplexers is the classification for this the digital switch ic.This multiplexer provides 4 inputs.A TAPE AND REEL packaging method is used in the switches.Additionally, it improves the characteristics of NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V.
MC100LVEL56DWR2G Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Dual
Power supplies of -3.3V
NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V
MC100LVEL56DWR2G Applications
There are a lot of ON Semiconductor MC100LVEL56DWR2G Signal Switches / Multiplexers / Decoders applications.
- Paper plants
- Automation system
- RF-based home automation system
- Data transfer
- Electronically controlled engine system
- Decimal decoder
- Metal detectors
- Used to connect a single source to multiple destinations
- Time division multiplexing system
- Telephone network
