MC100LVEL58DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 100LVEL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~3.8V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100LVEL58 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.8V |
| Power Supplies | -3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | DPST |
| Propagation Delay | 570 ps |
| Quiescent Current | 21mA |
| Number of Inputs | 2 |
| Supply Type | Dual |
| Prop. Delay@Nom-Sup | 0.59 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100LVEL58DT Overview
Due to the lack of space on the board, digital switch is provided in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).As a result, it is packaged in a way that is referred to as Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Multiplexer is used.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of ±3V~3.8V provides digital controlled switch's superior flexibility for designers.Multiplexers from the 100LVEL series can be used in a wide range of applications.There is a design for terminating 8 as part of its basic configuration.As its base part number is 100LVEL58, logic switch can also be used to find its related parts.The multiplexer's system is powered by 3.3V volts.This turn signal switch consists of 8 component pins.It employs GULL WING as the point at which conductors come to an end.As a type of supply, Dual is employed.This unit is mounted in the way of Surface Mount.To avoid unnecessary failures, keep the supply voltage at 3V (Vsup).To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.8V.In order to maintain mux switch's normal operation, power is provided to -3.3V.There are 1 outputs designed for the operation of the turn signal switch.Without the influence of external factors, it consumes 21mA current of multiplexer ic.This multiplexer provides 2 inputs.The signal switching is packaged by RAIL. A voltage level can be inserted into the 2 input lines of multiplexers.In addition, NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V provides improved characteristics.
MC100LVEL58DT Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Dual
Power supplies of -3.3V
2 input lines
NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V
MC100LVEL58DT Applications
There are a lot of ON Semiconductor MC100LVEL58DT Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor input
- Medical industry
- HDMI applications
- D/A converters
- Computer memory
- To select different devices in microprocessor output
- Automatic Monitoring systems
- Night vision cameras
- Logic gates for other digital devices
- Code converters
