MC100LVEL59DWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100LVEL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Multiplexer |
| Additional Feature | NECL MODE: VCC=0 WITH VEE=-3V TO -3.8 |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±3V~3.8V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100LVEL59 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 3 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.8V |
| Power Supplies | -3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | SPDT |
| Propagation Delay | 690 ps |
| Output Characteristics | OPEN-EMITTER |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100LVEL59DWR2 Overview
Providing this information in the 20-SOIC (0.295, 7.50mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the packaging method.digital switch ic uses the method of Surface Mount for mounting.Multiplexer is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.A supply voltage of ±3V~3.8V provides digital controlled switch's superior flexibility for designers.Multiplexers in the 100LVEL series are suitable for a wide range of applications.Among its basic features are 20 terminations.The part number for 100LVEL59 can be used to find its logic switch related parts as well.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemThis turn signal switch consists of 20 component pins.As the end of conductors, it uses GULL WING.There is a supply type of Dual employed as part of this supply.The board is configured with 20 pins.The mounting point is Surface Mount.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.It is advisable to keep the maximum supply voltage (Vsup) at 3.8V so as to avoid some unnecessary failures.In order for -3.3V to operate normally, a power supply is provided.As part of the operation of this turn signal switch, there are 1 outputs.According to TAPE AND REEL, the switches is packaged.To accept voltage levels, the multiplexers have2 input lines.In addition, NECL MODE: VCC=0 WITH VEE=-3V TO -3.8 provides improved characteristics.
MC100LVEL59DWR2 Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Dual
Power supplies of -3.3V
2 input lines
NECL MODE: VCC=0 WITH VEE=-3V TO -3.8
MC100LVEL59DWR2 Applications
There are a lot of ON Semiconductor MC100LVEL59DWR2 Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Control unit of Central Processing unit (CPU)
- Data-routing applications
- Analog, digital or video signal switching
- To select different task for memory in microprocessor memory systems
- Relay
- Solenoid cooling fan
- Robotic vehicles
- War field flying robot with a night vision flying camera
- Analog to digital conversion
