MC10E016FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E016 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 8 |
| Propagation Delay | 900 ps |
| Reset | Asynchronous |
| Family | 10E |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Output Lines | 8 |
| fmax-Min | 700 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 700000000Hz |
| Count Rate | 900MHz |
| Timing | Synchronous |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E016FN Overview
A 28-LCC (J-Lead)package is used for this device. The configuration of this device is based on 28terminations. 5Vis fully flexible due to its voltage supply. There are 1 terminations on the device. The number of all component pins is 28. As a result, it is packaged as Tube. In the circuit, there are 28pins that connect other components. The way of Surface Mount is used to mount it. In this case, it belongs to the family of [0]. Having been designed as a member of the 10Eseries, it is well suited for use in a wide range of applications. Binary Counteris used as the logic type. 0°C~85°Cshould be set as the operating temperature. This device is mounted in the Surface Mountposition. It is able to operate with higher reliability when the supply voltage of 4.2V~5.7V is provided. The are 8 bits information in the device. These electronic devices have many important features, and NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis one of them. Under its base part number of [0], you will find additional related parts. In this case, -5.2Vvoltage is generated by the voltage source. It takes supply voltage of 5V to operate. There is 4.2V minimum supply voltage (Vsup) for this device. Typically, the supply voltage (Vsup) is limited to 5.7V. The device is equipped with a 8output line.
MC10E016FN Features
Embedded in the 28-LCC (J-Lead) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Operating supply voltage of 5V
MC10E016FN Applications
There are a lot of ON Semiconductor MC10E016FN Counters & Dividers applications.
- Dual Up Counters
- Programmable decade counters
- Timers
- ALGEBRAIC COMPUTATION
- LINEARIZATION
- Frequency division
- Time delay circuits
- Programmable binary and decade
- Decade counter/decimal decode display (CD4017B）
- Fixed and programmable counters greater than 10
