MC10E136FNR2
| Parameters | |
|---|---|
| Reset | Asynchronous |
| Family | 10E |
| Logic Function | Counter |
| Direction | Up, Down |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 6 |
| fmax-Min | 550 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 550000000Hz |
| Count Rate | 650MHz |
| Timing | Synchronous |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E136 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 6 |
| Propagation Delay | 1.45 ns |
| Turn On Delay Time | 1.45 ns |
MC10E136FNR2 Overview
A device of this type is supplied in a package of type [0]. It is configured with 28terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. The device has 1terminations. There are a total of 28 pins in all components. It is packaged in the way of Tape & Reel (TR). In the circuit, there are 28pins that connect other components. It is mounted in the way of [0]. The 10Efamily is derived from it. As a member of the 10Eseries, it is ideal for a wide range of applications. A logic type of Binary Counter is adopted. Setting the operating temperature to 0°C~85°C is recommended. A mounting type of Surface Mountis adopted. In the case of a supply voltage of [0], it operates more reliably. There are 6bits of information contained in the device. Further related parts can be found under its base part number 10E136. For its packaging, TAPE AND REELis employed. From the voltage source, there is -5.2Vvoltage. To operate, it requires a supply voltage of 5V volts. There is 4.2V minimum supply voltage (Vsup) for this device. The maximum supply voltage (Vsup) is up to 5.7V. Input binary data is made by using the 6input lines.
MC10E136FNR2 Features
Embedded in the 28-LCC (J-Lead) package
Operating supply voltage of 5V
MC10E136FNR2 Applications
There are a lot of ON Semiconductor MC10E136FNR2 Counters & Dividers applications.
- Timing applications
- Divide-by"N" counters/frequency synthesizers
- DIVISION
- Control counters
- counting/frequency sy nthesizers-BCD output
- Divide-by-N counting
- VHF, UHF, FM, AM, etc.
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Binary counter/decoder
- Up Counters
