MC10E137FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E137 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Reset | Asynchronous |
| Family | 10E |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive, Negative |
| Count Rate | 2.2GHz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E137FNR2 Overview
It is a device supplied in the 28-LCC (J-Lead) package. In order to configure it, it uses 28terminations. The supply voltage of 5V permits it to operate with full flexibility. In this diagram, there are 1elements that are interconnected by wires. There are a total of 28 pins in all components. As [0], it is packaged. In the circuit, there are 28pins that connect other components. It is mounted in the way of [0]. It emerges as a member of 10E family. Having been designed as a member of the 10Eseries, it is well suited for use in a wide range of applications. A logic type of Binary Counter is adopted. It is recommended to set the operating temperature to 0°C~85°C. There is a mounting type of Surface Mounton this device. In the case of a supply voltage of [0], it operates more reliably. An array consists of 8bits for each element. It is important to note that in regards to this electronic device, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis an extremely significant feature. Its base part number, [0], contains more related parts. TAPE AND REEL is employed for its packing. The voltage source produces -5.2Vvoltage. There is 4.2V minimum supply voltage (Vsup) for this device. The maximum supply voltage (Vsup) is up to 5.7V.
MC10E137FNR2 Features
Embedded in the 28-LCC (J-Lead) package
8 bits per element
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC10E137FNR2 Applications
There are a lot of ON Semiconductor MC10E137FNR2 Counters & Dividers applications.
- Dual Up Counters
- TRUE RMS-TO-DC CONVERSION
- Time delay circuits
- Digital multiplexing and demultiplexing
- Frequency dividing circuits
- Timers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Time Out Timer for Consumer-Application Industrial Controls
- SQUARE ROOT
- Fixed or Programmable Frequency Division
