banner_page

MC10E150FN

D-Type, Latch 4.2V~5.7V 6 Bits Differential Latches 10E Series 10E150 28 Pins QUAD ECL 28-LCC (J-Lead)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC10E150FN
  • Package: 28-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 919
  • Description: D-Type, Latch 4.2V~5.7V 6 Bits Differential Latches 10E Series 10E150 28 Pins QUAD ECL 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Number of Pins 28
Operating Temperature 0°C~85°C
Packaging Tube
Published 2006
Series 10E
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory FF/Latches
Technology ECL
Voltage - Supply 4.2V~5.7V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 10E150
Pin Count 28
Qualification Status Not Qualified
Output Type Differential
Circuit 6:6
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.7V
Number of Circuits 2
Nominal Supply Current 62mA
Number of Bits 6
Propagation Delay 550 ps
Quiescent Current 52mA
Turn On Delay Time 375 ps
Family 10E
Logic Function D-Type, Latch
Output Characteristics OPEN-EMITTER
Logic Type D-Type Transparent Latch
Prop. Delay@Nom-Sup 0.55 ns
Trigger Type LOW LEVEL
High Level Output Current -50mA
Low Level Output Current 32mA
Independent Circuits 1
Number of Output Lines 6
fmax-Min 900 MHz
Height Seated (Max) 4.57mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MC10E150FN Overview


In the 28-LCC (J-Lead) package, it is embedded. Packaged in the way of Tube. In this configuration, the output is set to Differential. This electrical device has Logic type D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 4.2V~5.7V is used as the supply voltage for this device. During operation, the temperature is set at 0°C~85°C. It is a type of FPGA belonging to the 10E series. An electronic part with 6 bits is designed. This device is designed with 28 terminations. It is a member of the 10E150 family. The device works with a voltage of 5V for its supply voltage. There are 28 pins on it. In the world of electronics, this electronic device belongs to the family of 10E. Designed with 28 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. The part is in the FF/Latches subcategory. It reaches 5.7V when the supply voltage (Vsup) reaches maximum. 6 output lines provide binary equivalents of input lines. It consumes 52mA current from its quiescent state without being affected by external factors at all. Its superior flexibility is achieved by using 2 circuits. There is 32mA low level output current set. It has been set to -50mA for the high level output current.

MC10E150FN Features


28-LCC (J-Lead) package
10E series
6 Bits
10E150 family
28 pin count
28 pins

MC10E150FN Applications


There are a lot of ON Semiconductor MC10E150FN Latches applications.

  • PCs and Notebooks
  • Relay replacement
  • Shift right register
  • Up-Down Johnson
  • Multistage ripple counting
  • Parallel data synchronization
  • Up/down difference counting
  • Counter control
  • Four-bit storage with output enable
  • Hammer

Write a review

Note: HTML is not translated!
    Bad           Good