banner_page

MC10E150FNR2

D-Type, Latch 4.2V~5.7V 6 Bits Differential Latches 10E Series 10E150 28 Pins QUAD ECL 28-LCC (J-Lead)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC10E150FNR2
  • Package: 28-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 317
  • Description: D-Type, Latch 4.2V~5.7V 6 Bits Differential Latches 10E Series 10E150 28 Pins QUAD ECL 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Number of Pins 28
Operating Temperature 0°C~85°C
Packaging Tape & Reel (TR)
Published 2006
Series 10E
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology ECL
Voltage - Supply 4.2V~5.7V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 10E150
Pin Count 28
Qualification Status Not Qualified
Output Type Differential
Circuit 6:6
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.7V
Number of Circuits 2
Nominal Supply Current 62mA
Number of Bits 6
Propagation Delay 550 ps
Quiescent Current 52mA
Turn On Delay Time 375 ps
Family 10E
Logic Function D-Type, Latch
Output Characteristics OPEN-EMITTER
Logic Type D-Type Transparent Latch
Prop. Delay@Nom-Sup 0.55 ns
Trigger Type LOW LEVEL
High Level Output Current -50mA
Low Level Output Current 32mA
Independent Circuits 1
Number of Output Lines 6
fmax-Min 900 MHz
Height Seated (Max) 4.57mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MC10E150FNR2 Overview


It is embedded in the 28-LCC (J-Lead) package. A package of Tape & Reel (TR) has been used. Differential is used for the output it is configured with. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. A 4.2V~5.7V supply voltage is required to operate it. There is 0°C~85°C operating temperature. There are a number of FPGAs in this series, including this one. With this electronic part, there are 6 bits. This device is designed with 28 terminations. 10E150 is the family name of it. The device is operated when the supply voltage is set to 5V. It has 28 pins that makes it easy to use. This electronic device belongs to the family of 10E. Designed with 28 pins, it is compatible with a wide range of devices. Surface Mount is the way in which this electronic part is mounted. The part is in the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 5.7V. Based on its reliable performance, this device is well suited to TAPE AND REEL. Regardless of the input line, the binary equivalent of the input line will be generated by the 6 output lines. It consumes 52mA current from its quiescent state without being affected by external factors at all. 2 circuits are used to provide this superior level of flexibility. It is set to zero for the low level output current. The high level output current is set to -50mA.

MC10E150FNR2 Features


28-LCC (J-Lead) package
10E series
6 Bits
10E150 family
28 pin count
28 pins

MC10E150FNR2 Applications


There are a lot of ON Semiconductor MC10E150FNR2 Latches applications.

  • Parallel data synchronization
  • A/D converters
  • Instrumentation
  • Up/down difference counting
  • Double bus register system
  • Serial Output Register
  • General-Purpose Register
  • Decade counting
  • Address register
  • Registers

Write a review

Note: HTML is not translated!
    Bad           Good