MC10E154FNG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10E154 |
| Pin Count | 28 |
| Circuit | 5 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 5 |
| Throw Configuration | SPDT |
| Propagation Delay | 800 ps |
| Family | 10E |
| Logic Function | Latch, Multiplexer |
| Number of Inputs | 10 |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Prop. Delay@Nom-Sup | 0.7 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| fmax-Min | 700 MHz |
| Height | 4.57mm |
| Length | 11.58mm |
| Width | 11.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10E154FNG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 28-LCC (J-Lead).Tube represents its packaging.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Multiplexer as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When operated with a ±4.2V~5.7V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers from 10E series can be used for a wide range of applications.As parts of its basic configuration, 28 terminations are desgined.The base part number is 10E154, which is also useful when looking up signal switch's related components.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 28 component pins.J BEND is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Dual employed as part of this supply.This multiplexer ic has 28 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.There is a family of 10E members.There are 5 bits in signal multiplexer.Vsup should be kept at 4.2V to prevent some unnecessary failures.It is provided with 10 inputs.
MC10E154FNG Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
MC10E154FNG Applications
There are a lot of ON Semiconductor MC10E154FNG Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Computer memory
- Metal detectors
- Enabling block of memory depending on address in memory chips
- Enabling different functions units in microprocessor instruction decoding
- War field flying robot with a night vision flying camera
- Microprocessor input/output systems
- Home automation system
- Make half adder
- Medium scale TV wall
