MC10E155FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E155 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Circuit | 6 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Number of Bits | 6 |
| Propagation Delay | 700 ps |
| Family | 10E |
| Logic Function | Latch, Multiplexer |
| Number of Inputs | 12 |
| Output Characteristics | OPEN-EMITTER |
| Supply Type | Dual |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 0.7 ns |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| fmax-Min | 700 MHz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E155FN Overview
This is a relatively small item of digital switch that is included in the 28-LCC (J-Lead) in order to save space on the board.Tube represents its packaging.Surface Mount is the mounting method digital switch ic uses.the multiplexers uses IC Multiplexer as the analog IC.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of ±4.2V~5.7V, designers have greater flexibility of digital controlled switch.The multiplexers from 10E series can be used for a wide range of applications.Among its basic features are 28 terminations.There is a base part number 10E155 that can be used to locate signal switch's related components as well.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch contains 28 component pins.As a result, conductors end at J BEND.As a type of supply, Dual is employed.The board has 28 pins configured.The mounting is in the way of Surface Mount.There is a family of 10E members.The multiplexer ic provides 6 bits.Vsup (maximum supply voltage) should be kept as 5.7V to prevent unnecessary failures.This multiplexer has a total of 12 inputs.For the purpose of accepting voltage levels, the multiplexers have 2 input lines.
MC10E155FN Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
2 input lines
MC10E155FN Applications
There are a lot of ON Semiconductor MC10E155FN Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Signal router
- Make full adder
- Data distribution
- Time division multiplexing system
- PCIe
- Automatic health monitoring systems
- To select different task for memory in microprocessor memory systems
- Combinational circuit
- Data demultiplexing
