banner_page

MC10E155FNR2G

28 Terminations±4.2V~5.7V Signal switch10E Series 1 Functions


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-MC10E155FNR2G
  • Package: 28-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 359
  • Description: 28 Terminations±4.2V~5.7V Signal switch10E Series 1 Functions(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Surface Mount YES
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 10E
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
Type Multiplexer
Terminal Finish MATTE TIN
Additional Feature NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Technology ECL
Voltage - Supply ±4.2V~5.7V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 28
JESD-30 Code S-PQCC-J28
Qualification Status COMMERCIAL
Circuit 6 x 2:1
Supply Voltage-Max (Vsup) 5.7V
Supply Voltage-Min (Vsup) 4.2V
Number of Bits 6
Family 10E
Output Characteristics OPEN-EMITTER
Output Polarity TRUE
Propagation Delay (tpd) 0.75 ns
Voltage Supply Source Dual Supply
Independent Circuits 1
fmax-Min 700 MHz
Height Seated (Max) 4.57mm
RoHS Status ROHS3 Compliant

MC10E155FNR2G Overview


Providing this information in the 28-LCC (J-Lead) enables digital switch board space to be saved.The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Multiplexer as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a ±4.2V~5.7V supply voltage.The multiplexers from 10E series can be used for a wide range of applications.There are 28 terminations included in its basic configuration.In this case, 5V is the voltage supplied to the multiplexer's system.Signal switch has 28 component pins.It employs J BEND as the point at which conductors come to an end.In the 10E family, the logic switch is included.As a result, signal multiplexer provides a total of 6 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4.2V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 5.7V in order to prevent some unnecessary failures.In addition, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V exhibits improved characteristics.

MC10E155FNR2G Features


Supplied in the 28-LCC (J-Lead) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V

MC10E155FNR2G Applications


There are a lot of Rochester Electronics, LLC MC10E155FNR2G Signal Switches / Multiplexers / Decoders applications.

  • VGA
  • Make half adder
  • Code converters
  • To select different devices in microprocessor output
  • D/A converters
  • Speed synchronization of multiple motors in industries
  • Data demultiplexing
  • Decimal decoder
  • Logic circuits
  • Data collection system

Write a review

Note: HTML is not translated!
    Bad           Good