MC10E156FNR2G
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Number of Bits | 3 |
| Propagation Delay | 900 ps |
| Family | 10E |
| Logic Function | Latch, Multiplexer |
| Number of Inputs | 12 |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.9 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 90mA |
| Number of Input Lines | 4 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| fmax-Min | 700 MHz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10E156 |
| Pin Count | 28 |
| Circuit | 3 x 4:1 |
MC10E156FNR2G Overview
As a means of saving space, digital switch is provided in the 28-LCC (J-Lead).In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Multiplexer is used.By keeping the operating temperature at 0°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a ±4.2V~5.7V supply voltage, which gives it a lot of flexibility.Since they are members of the 10E series, they can be used in a wide variety of applications.Among its basic configurations are 28 terminations.To find signal switch's related components, a base part number of 10E156 may also be used.The multiplexer's system is powered by 5V voltage.This turn signal switch has 28 component pins.As a result, J BEND represents the end of the conductors.In this case, Dual is employed as the supply type.With 28 pins, it is configured.Surface Mount is the way it is mounted.The logic switch is a member of the 10E family.In the signal multiplexer, there are 3 bits available.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.7V.It is provided that -5.2V has a power supply in order to function normally.There are 12 inputs provided in this multiplexer.A TAPE AND REEL packaging method is used in the switches.To accept voltage levels, the multiplexers have4 input lines.
MC10E156FNR2G Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -5.2V
4 input lines
MC10E156FNR2G Applications
There are a lot of ON Semiconductor MC10E156FNR2G Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- War field flying robot with a night vision flying camera
- Steel plants
- High-performance memory-decoding applications
- Home automation system
- Decimal decoder
- Solenoid cooling fan
- Data distribution
- Robotic vehicles
- Enabling different rows of memory depending on address in memory chips
